|
Item
No. |
Maize
Part No. |
Deere
Part No. |
Description |
Qty
Req |
Maize
Price |
|
01 |
51787M |
AZ51787 |
Feedroll, upper rear, stainless steel, more aggressive design
All 6000/7200-7500 |
1 |
460.00 |
|
02 |
12673M |
Z12673 |
Deflector, feedroll end - All 6000/7200-7500 |
2 |
25.50 |
|
03 |
81670M |
Z81670 |
Shaft, upper rear feedroll, gear drive, 3/16" longer, induction hardened shaft ends, SN 504342 and above replaces #76619M, All 6000/7200-7500 |
1 |
83.00 |
|
04 |
60516M |
Z60516 |
Shaft, upper rear feedroll, chain drive, induction hardened
shaft, SN 504341 and below |
1 |
52.00 |
|
05 |
53184M |
AZ53184 |
Feedroll, upper front, straight, replaceable teeth stainless
steel includes bearings and seals - All 6000/7200-7500 |
1 |
1,238.00 |
|
06 |
53186M |
N/A |
Replaceable tooth, stainless steel, bolt on, Maize straight tooth,
serrated tooth |
8 |
41.00 |
| 06A |
53187M |
N/A |
Replaceable tooth, stainless steel, bolt on, non-serrated |
8 |
34.50 |
|
07 |
53184MBK |
N/A |
Bolt kit, replaceable tooth, upper front feedroll, stainless steel
All 6000/7200-7500 |
1 |
23.60 |
|
08 |
10108M |
JD10108 |
Needle bearing, upper front feedroll - All 6000/7200-7500 |
4 |
8.00 |
|
09 |
28870M |
AL28870 |
Seal, upper fronnt feedroll - All 6000/7200-7500 |
4 |
9.00 |
|
10 |
53185M |
AZ53185 |
Feedroll, upper front, spiral tooth, stainless steel, thicker teeth and side plates, includes bearings and seals,
All 6000/7200-7500 |
1 |
1,150.00 |
|
11 |
53185MJ |
N/A |
Spiral tooth replacement, - All 6000/7200-7500 |
24 |
13.25 |
|
12 |
61045M |
Z61045 |
Shaft, upper front feedroll, induction hardened shaft ends
All 6000 |
1 |
160.00 |
|
13 |
74062M |
Z74062 |
Shaft, upper front feedroll, induction hardened shaft ends, allows instllation of additional springs,
All 6000/7200-7500 |
1 |
175.00 |
|
14 |
13019M |
Z13019 |
Scraper, LR feedroll, use with 1" cutter bar - All early
6000 series |
1 |
152.00 |
|
15 |
12818M |
Z12818 |
Scraper, LR feedroll, tall, for 36mm cutter bar, we
recommend using in all 6000 series for better cutter bar
clearance - 6000/7200-7500 |
1 |
168.00 |
|
16 |
56217M |
AZ56217 |
Feedroll, lower rear, induction hardened splines, shaft
ends and outside 2" of roll, manufactured from special
material, longer life - All 6000/7200-7500 |
1 |
381.00 |
|
17 |
47886M |
AZ47886 |
Chain coupling, lower rear feedroll to gear box drive
shaft, heavy duty - All 6000/7200-7500 |
1 |
28.50 |
|
18 |
51114M |
AZ51114 |
Coupling sprocket, lower feedroll, heat treated shaft
All 6000/7200-7500 |
1 |
75.00 |
|
19 |
51115M |
AZ51115 |
Coupling sprocket, gear box drive shaft to lower rear
feedroll, heat treated - All 6000/7200-7500 |
1 |
70.00 |
|
20 |
50090M |
AZ50090 |
Feedroll, lower front, stainless steel, cross bars are thicker
and deeper for better and longer life - All 6000/7200-7500 |
1 |
895.00 |
|
21 |
50086M |
AZ50086 |
Pan, rear, lower feedroll - All 6000/7200-7500 |
1 |
56.00 |
|
22 |
63659M |
Z63659 |
Pan, front, lower feedroll - All 6000/7200-7500 |
1 |
45.00 |
